NewTek 3Play 4800 - Manual (Page 102)

Page | 86
MACROS
3Play’s extensive Macros system provides a wealth of powerful capabilities. Macros and related
tools are discussed in detail in Chapter 17.
WORKSPACES
Really, 3Play provides two
multiview monitor displays – one
right on the Replay Desktop
(a.k.a., the Interface), normally
comprising its upper third, the
other a fully independent display.
The latter is presented on a
secondary monitor output labeled Multiview on
the rear connector panel.
The overall layout of these monitoring areas is governed by
Workspace presets. Click the Workspaces button in the
Dashboard area at the top of the screen to display its menu.
Simply select a preset for either Interface or Multiview panes
using this menu as shown (Figure 66).
Viewport also have further custom options, such as the display of VU meter overlays. See
Section 9.1, Overlay Options for details.
The Multiview Resolution menu item lets you configure the external display device you connect.
Select the native resolution of the device for best results.
Note: Changing Multiview output options can cause frames to be dropped, so modifications
during live production are discouraged.
Figure 66