Hypertherm Powermax105 Service Manual - Manual (Page 66)

Hand Cutting
5-2
powermax
105 Service Manual
Using the hand torch
WARNINg:
INStANt-oN toRCHES
PlASMA ARC CAN CAUSE INJURy AND bURNS
Plasma arc comes on immediately when the torch trigger is activated.
the plasma arc will cut quickly through gloves and skin.
• Wear correct and appropriate protective equipment.
• Keep away from the torch tip.
• Do not hold the workpiece and keep your hands clear of the cutting path.
• Never point the torch toward yourself or others.
operate the safety trigger
The hand torches are equipped with a safety trigger to prevent accidental firings. When you are ready to use the torch,
flip the trigger’s safety cover forward (toward the torch head) and press the red torch trigger as show below.
1
2
3