Hypertherm Powermax105 Service Manual - Manual (Page 292)

Torch componenT replacemenT
10-2
powermax
105 Service Manual
 Step task Page
 1. Disconnect the power, gas supply, and torch 10-7
 2. Remove the left handle 10-8
 3. Remove the trigger and spring 10-9
 4. Remove the start switch 10-10
 5. Remove the right handle 10-11
 6. Install the right handle 10-14
 7. Install the trigger and spring 10-9
 8. Install the left handle 10-8
 Step task Page
 1. Disconnect the power, gas supply, and torch 10-7
 2. Remove the left handle 10-8
 3. Remove the trigger and spring 10-9
 4. Replace the start switch 10-10
 5. Install the trigger and spring 10-9
 6. Install the left handle 10-8
 Step task Page
 1. Disconnect the power, gas supply, and torch 10-7
 2. Remove the left handle 10-8
 3. Remove the trigger and spring 10-9
 4. Remove the start switch 10-10
 5. Remove the right handle 10-11
 6. Replace the cap-sensor switch 10-11
 7. Install the right handle 10-14
 8. Install the trigger and spring 10-9
 9. Install the left handle 10-8
Hand torch: Replacing the handles
Kit # 228954, 228955
Hand torch: Replacing the start switch
Kit # 128642
Hand torch: Replacing the cap-sensor switch
Kit # 228719, 228109