Hypertherm Powermax105 Service Manual - Manual (Page 20)

SpecificationS
1-2
powermax
105 Service Manual
Safety information
Before you set up and operate your Hypertherm system, read the separate Safety and Compliance Manual included
with your system for important safety information.
System description
The Powermax105 is a highly portable, 105-amp, handheld and mechanized plasma cutting system appropriate for a
wide range of applications. The Powermax system uses air or nitrogen to cut electrically conductive metals, such as
mild steel, stainless steel, or aluminum. Smart Sense™ technology automatically adjusts the gas pressure according to
cutting mode and torch lead length for optimum cutting.
The Powermax105 can cut thicknesses up to 38 mm (1-1/2 inches) and pierce thicknesses up to 22 mm (7/8 inch).
FastConnect™ provides a simple push-button torch connection to the power supply for quick torch changes.
The typical handheld Powermax system includes a Duramax™ series 75° hand torch with a consumables box and work
lead cable. Reference materials include: operator manual, quick setup card, registration card, setup DVD, and safety
manual.
The typical mechanized Powermax system includes a Duramax series 180° full-length machine torch with a consumables
box, work lead cable, and remote-start pendant. Reference materials include: operator manual, quick setup card,
registration card, setup DVD, and safety manual.
See your Hypertherm distributor for other system configurations. You can order additional styles of torches,
consumables, and accessories such as the plasma cutting guide. See the Parts section for a list of spare and optional
parts.
Powermax105 power supplies are shipped without a plug on the power cord. See the Power Supply Setup section for
more information.
Note: Some CCC certified configurations do not ship with a power cord.
Powermax105 3-phase systems include the following models:
• The 200–600 V CSA model is a universal power supply that can automatically adjust to operate with AC
voltages from 200 to 600 V.
• The 230-400 V CE model can automatically adjust from 230 to 400 V.
• The 380 V CCC/230–400 V CE model can automatically adjust from 230 to 400 V.
Note: To maintain CE certification, install power cord kit 228886.
• The 400 V CE model is 400 V only.
• The 380 V CCC model is 380 V only.