Hypertherm Powermax105 Service Manual - Manual (Page 128)

Mechanized cutting
7-2
powermax
105 Service Manual
Connecting an optional remote-start pendant
Powermax105 configurations with a Duramax machine torch can include an optional remote-start pendant.
• Part number 128650: 7.6 m (25 feet)
• Part number 128651: 15.2 m (50 feet)
• Part number 128652: 22.9 m (75 feet)
If your power supply has the optional machine interface receptacle on the rear of the power supply, remove the
receptacle cover and plug the Hypertherm remote-start pendant into the receptacle.
Note: The remote-start pendant is for use only with a machine torch. It will not operate if a handheld torch is
installed.
Receptacle for the
remote-start pendant or a
machine interface cable.