Unpack the powermax system, Claims, Unpack the powermax system -2 – Hypertherm Powermax105 Service Manual User Manual
Page 32: Claims -2, Powermax
Power SuPPly SetuP
2-2
powermax
105
Service Manual
Unpack the Powermax system
1. Verify that all items on your order have been received in good condition. Contact your distributor if any parts are
damaged or missing.
2. Inspect the power supply for damage that may have occurred during shipping. If there is evidence of damage,
refer to Claims below. All communications regarding this equipment must include the model number and the serial
number located on the back of the power supply.
3. Before you set up and operate this Hypertherm system, read the separate Safety and Compliance Manual included
with your system for important safety information.
Claims
• Claims for damage during shipment – If your unit was damaged during shipment, you must file a claim
with the carrier. Hypertherm will furnish you with a copy of the bill of lading upon request. If you need additional
assistance, call the nearest Hypertherm office listed in the front of this manual.
• Claims for defective or missing merchandise – If any component is missing or defective, contact your
Hypertherm distributor. If you need additional assistance, call the nearest Hypertherm office listed in the front of
this manual.