Comtech EF Data SMS-7000 - Manual (Page 93)

SMS-7000 Modem Protection Switch Operation
Rev. 3 3–23
3.4.7 System Status Configuration Menu
Refer to Figure 3-9.
One of the following four menus sequences will be displayed based on current backup modem
switching modes:
1. Configuration: Backup #1 INDEPENDENT and Backup #2 INDEPENDENT
2. Configuration: Backup #1 INDEPENDENT and Backup #2 DEPENDENT
3. Configuration: Backup #1 DEPENDENT and Backup #2 INDEPENDENT
4. Configuration: Backup #1 DEPENDENT and Backup #2 DEPENDENT
BU1 ASSGN MOD mmmmmmmm
xxx PRIORITY pppppppp Status window
Where:
mmmmmmmm = 1 through 8 active prime Mods.
'–' = Not active.
xxx = IND (Independent)/DEP (Dependent) active
backup Mod switching mode.
p= Active prime Mod priority.
H = High.
M = Medium.
L = Low.
BU1 ASSGN DEMOD dddddddd
xxx PRIORITY pppppppp Status window.
Where:
dddddddd = 1 through 8 active prime Demods.
'–' = Not active.
xxx = IND (Independent)/DEP (Dependent) active
backup Demod switching mode.
p= Active prime Demod priority.
H = High.
M = Medium.
L = Low.
BU2 ASSGN MOD mmmmmmmm
xxx PRIORITY pppppppp Status window.
Where:
mmmmmmmm = 1 through 8 active prime Mods.
'–' = Not active.
xxx = IND (Independent)/DEP (Dependent) active
backup Mod switching mode.
p= Active prime Mod priority.
H = High.
M = Medium.
L = Low.
BU2 ASSGN DEMOD dddddddd
xxx PRIORITY pppppppp Status window.
Where:
dddddddd = 1 through 8 active prime Mods.
'–' = Not active.
xxx = IND (Independent)/DEP (Dependent) active
backup Demod switching mode.
p= Active prime Demod priority.
H = High.
M = Medium.
L = Low.