Comtech EF Data SMS-7000 - Manual (Page 35)

Rev. 3 2–1
2
Chapter 2.
INSTALLATION
This chapter provides instructions for unpacking and installation, as well as external
connection information for the switch.
2.1 Unpacking
The switch (which consists of three sections) and the manual are packaged in pre-
formed, reusable, cardboard cartons that contain foam spacing for maximum shipping
protection.
C AU TIO N
Do not use any cutting tool that will extend more than 1 inch (2.5 cm) into
the container and cause damage to the switch.
To remove the switch:
1. Cut the tape at the top of the carton (indicated by OPEN THIS END).
2. Remove the cardboard/foam packing covering the switch.
3. Remove the switch components, product manual, and power cords from the
carton.
4. Save the packing material for storage or reshipment purposes.
5. Inspect the equipment for any possible damage incurred during shipment.
6. Check the equipment against the packing list to ensure the shipment is correct.