Comtech EF Data SMS-7000 - Manual (Page 89)

SMS-7000 Modem Protection Switch Operation
Rev. 3 3–19
3.4.5 Configuration Operation Mode Menu
Refer to Figure 3-7.
Operation Mode AUTO or MANUAL
If ‘AUTO’, the Backup modem automatically replaces
the failed Prime modems.
If ‘MANUAL’, a submenu is enabled for direct
control of the protection switch. The submenu
displayed depends on the switching mode of the
current backup modem; i.e., INDEPENDENT or
DEPENDENT.
Upon entry, the current status is displayed. Press [
↑]
or [
↓] to make the selection. Press [ENTER] to
execute the change.