Comtech EF Data SMS-7000 - Manual (Page 71)

Rev. 3 3–1
3
Chapter 3.
OPERATION
This chapter defines the controls and procedures for configuration and operation of the
protection switch.
Note: Familiarization with the front panel controls (Figure 3-1) and/or the related remote
commands described in Appendix A is recommended.
3.1 Configuration
The configuration of the protection switch may be performed from the front panel, or
from a terminal or personal computer connected to the protection switch remote port
(J1).
Each front panel menu screen has corresponding remote commands. The front panel
display menus are designed to guide the operator through the configuration process.
Note: Refer to the menu tables presented in this chapter for specific configuration
information.
Figure 3-1. SMS-7000 Front Panel View