Avery Dennison SNAP 611 - Manual (Page 84)

76 • A. Specifications and Accessories Users Manual – 610 / 611/ 612 Printers
Supply Specifications
Supply Types: Thermal Transfer Perforated Fabric Labels
Fabric Label Kits: Kits include fabric and ribbon
Paxar Systems: The fabric is available in standard widths, ranging from 1.0
inch (25 mm) to 1.75 inches (45 mm), perforated to standard
lengths.
Paxar Europe: The fabric is available in 25 mm to 50 mm widths.
Sizes: Supplies are available in widths ranging from 1.0 inch
(25 mm) to 4.25 inches (108 mm) and lengths ranging from
1.0 inches (25 mm) to 12.5 inches (318 mm).
Contact your Paxar Representative for more information about kits and
approved supplies. Additional configurations may be available.
If you experience label jamming with narrow supplies in humid
environments, store supplies separately from the printer in a dry, less
humid environment.
Ribbon Specifications
Ribbon Storage: Do not leave ribbon in direct sunlight, high temperatures, or
high humidity.
Ribbon Type: CT1111 (Paxar Systems)
Ribbon Widths: CT1111 is available in the following widths:
1.3 inches (33 mm)
1.61 inches (41 mm)
2.16 inches (55 mm)
4.1 inches (105 mm)
For best results, use a ribbon that is 0.25 inches (6.35 mm)
wider than your fabric.
Ribbon Length: 23,600 inches (600 meters)
Contact your Paxar Representative for more information about approved
ink products. Additional configurations may be available.