Avery Dennison SNAP 611 - Manual (Page 28)

20 • 2. Loading Supplies Users Manual - 610 / 611 / 612 Printers
14. Close the printhead by pressing down on the thumb well until you hear it click into place.
Close the cover.
Adjusting the Wide / Narrow Knobs
You may need to adjust the two wide / narrow knobs according to the width of your supply.
For supply that is more than two inches, adjust the knobs to the wide setting. For supply that
is two inches or less, adjust the knobs to the narrow setting.
You must adjust both of the knobs to
the same position.
If you experience ribbon smudging in cold, dry
environments, adjust the wide / narrow knobs
to the wide setting.
For wide supplies, push down and turn the
wide / narrow knobs clockwise with a
screwdriver.
For narrow supplies, turn the wide / narrow
knobs counter-clockwise with a screwdriver
until it pops back up.
The adjustment is shown in the wide position.