Avery Dennison SNAP 611 - Manual (Page 80)

72 • 9. Troubleshooting Users Manual – 610 / 611/ 612 Printers
421 Internal software list error. Call Technical Support.
422 Duplicate internal name. Call Technical Support.
423 Internal software list error. Call Technical Support.
424 Internal software list error. Call Technical Support.
425 Internal software list error. Call Technical Support.
426 Internal software list error. Call Technical Support.
427 Format name is invalid. Valid name is 1 8 characters inside quotes or "" for a printer-
assigned name. Press Escape / Clear to continue. If the error reappears, call
Technical Support.
428 Batch name is invalid or graphic not found.
429 A field number appears more than once in a format.
430 The format uses a graphic file that cannot be found.
433 The batch references a field number that does not exist in the format.
497 An error occurred during the loop back test on the parallel port. Call Service.
499 An error occurred during the loop back test on the serial port. Call Service.
Data Formatting Errors
Errors 571 to 618 are data formatting errors. This type of error happens when a field prints
incorrectly. Your System Administrator can correct the format, batch, or graphic packet and
send the print job again. For errors 571 to 614, the printer will still print, but the data may be
incomplete, missing, or wrong.
Error Description / Action
571
UPC or EAN bar code data length in the batch doesn’t fit the format.
572 Batch data doesn’t fit the format, the field contains blanks, or data mismatch.
573 Batch data in price field doesn’t fit the format or the field contains blanks.
574 Batch data in check digit scheme doesn’t fit the format, or the field contains blanks.
575 The graphic included in your format could not be found.
600 Imaging error because the batch was refused.
601 An error occurred while the batch was imaging.
602 The batch was not found during imaging.
603 The batch was not found while imaging. Resend the batch packet. If the error
persists, call Technical Support.
611 Font, bar code, or density in the batch doesn’t fit the format.
612 Batch data is missing or doesn’t match the format.
613 Reference point off tag.