Avery Dennison SNAP 611 - Manual (Page 56)

48 • 6. Printing Users Manual – 610 / 611/ 612 Printers
Preventing Jams
To prevent jams
♦ Design formats using the appropriate non-print zones.
♦ Do not leave the printhead closed (in the locked position) longer than 30 minutes without
printing. Open (unlock) the printhead before a break period, at the end of each shift, and
at the end of each day.
Printing Serial Bar Codes
Currently, the 610 / 611 / 612 printer does not support printing serial (ladder) bar codes.
Parallel (Picket Fence) Bar Code Serial (Ladder) Bar Code
Adjusting the Cut Angle
To adjust the cut angle:
1. Loosen the thumbscrews.
2. Slightly rotate the knife to the left or to the right. The knife may appear to sit at a slight
angle to the printer.
3. Tighten the thumbscrews.
4. Cut another batch of tags. If you are unable to adjust for a straight cut, call Technical
Support.