Avery Dennison SNAP 611 - Manual (Page 39)

Users Manual – 610 / 611/ 612 Printers 4. Communication Values • 31
4. Communication Values
This chapter tells you how to set the serial or parallel communication values. These values
provide the link for normal online printing.
You need to set your Serial Comm values to match your computer's online communications.
Before entering the communication values, see your System Administrator.
The serial communication values are listed in the table below.
Option Choices Default
Baud rate 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 9600
Word length 7 / 8 8
Stop bits 1 / 2 1
Parity None / Odd / Even None
Flow control None / XON - XOFF / DTR - CTS DTR
Reset No / Yes No
Baud Rate
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm.
Then, follow these steps:
1. Press Í or Î until you see
SERIAL COMM
Baud Rate Æ
2. Press Enter / Pause. You will see the current setting, for example:
BAUD RATE
Å 9600 Æ
3. Press Í or Î to display the baud rate you need, then press Enter / Pause. Press
Escape / Clear three times to exit to the Main Menu.