Avery Dennison SNAP 611 - Manual (Page 23)

Users Manual - 610 / 611 / 612 Printers 2. Loading Supplies • 15
7. Lay the label strip across the supply guide (B). It is not necessary at this point to put the
label strip in the guide. Lay the label strip across the platen roller (C) and thread the end
of the strip into the gap between the platen roller and the auxiliary feed (D).
B
C
D
8. Reach under the platen roller and pull the label strip back towards the turn bar (F). Thread
the label strip under the guide roller (E) and around the turn bar (F) as shown below.
E
F