Avery Dennison SNAP 611 - Manual (Page 63)

Users Manual – 610 / 611/ 612 Printers 7. Care and Maintenance • 55
6. Rub the cotton swab across the supply sensor and remove any build-up.
7. Clean the build-up in the supply path.
8. Let the printer dry and reload your supplies.
9. Close the exit cover by pushing firmly on it as shown. Both latches will click into place.
10. Close the cover and printhead assembly.
11. Turn on the printer.
12. Press Feed / Cut to position the supply under the printhead.