Avery Dennison SNAP 611 - Manual (Page 75)

Users Manual – 610 / 611/ 612 Printers 9. Troubleshooting • 67
Error Messages
You may receive the following types of error messages:
♦ Data Errors
♦ Communication Errors
Some errors numbered 400 – 438 and 500 – 574 are internal software errors. Errors
numbered 900 – 999 are hard printer failures. If you cannot clear an error, turn off the printer,
wait several seconds and then turn on the printer. Call Technical Support if you receive any
error message not listed in this chapter.
Data Errors
Errors 001 to 405 and 429 to 435 are data errors. This type of error indicates that incorrect
data was sent to the printer, and the printer is ignoring it. Your System Administrator should
correct the packet and send it back to the printer.
Error Description / Action
001
Packet ID number must be 1 to 999.
002 Name must be 1 to 8 characters inside quotes or a printer-assigned name (“ ”).
003 Action must be A (add) or C (clear).
004 Supply length is invalid.
005 Supply width is invalid.
006 Storage devise must be F (Flash), N (non-volatile RAM), R (volatile RAM), or T
(temporary for graphics).
007 Unit of measure must be E (English), M (Metric), or G (Dots).
010 Field ID number is outside the range 0 to 999.
011 Field length exceeds 2710.
012 Row field position is greater than the maximum stock dimension.
013 Column field position is greater than the maximum stock dimension.
014 Font style must be 1, 2, 3, 4, 10, 11, 15, 16, 17, 18, or 50.
015 Character rotation must be 0 (0 degree), 1 (90 degree), 2 (180 degree), or 3 (270
degree).
016 Field rotation must be 0 (0 degree), 1 (90 degree), 2 (180 degree), or 3 (270 degree).
017 Field restriction must be V (variable) or F (fixed).