Avery Dennison SNAP 611 - Manual (Page 78)

70 • 9. Troubleshooting Users Manual – 610 / 611/ 612 Printers
257 Feed mode must be 0 (continuous) or 1 (On-Demand).
258 Supply position is outside the range.
259 Contrast adjustment must be –699 to 699 dots.
260 Print adjustment must be –99 to 99 dots.
261 Margin adjustment must be –99 to 99 dots.
262 Speed adjustment is invalid.
263 Primary monetary symbol is invalid.
264 Secondary symbol selection must be 0 (none) or 1 (primary secondary sign).
265 Monetary decimal places must be 0 to 3.
266 Character string length in Packet E must be 5 (MPCL control characters) or 7 (ENQ /
IMD command character).
267 Baud rate selection must be 0 (1200), 1 (2400), 2 (4800), 3 (9600), 4 (19200), 5
(38400), 6 (57600), or 7 (115200).
268 Word length selection must be 0 (7 bits) or 1 (8 bits).
269 Stop bits selection must be 0 (1 bit) or 1 (2 bits).
270 Parity selection must be 0 (none), 1 (odd), or 2 (even).
271 Flow control selection must be 0 (none), 1 (DTR / DSR), 2 (CTS / RTS), or
3 (XON / XOFF).
272 Internal code page selection must be 0 (internal), 1 (ANSI), 2 (DOS 437), or
3 (DOS 850).
273 Cut adjustment must be –300 to +300 dots.
282 RS232 Trailer string is too long. Use a maximum of 3 characters.
283 ENQ Trailer string is too long. Use a maximum of 3 characters.
284 The buffer type must be T (transmit), R (receive), I (image), F (format, batch date and
graphics), D (downloadable fonts), or V (vector / scalable fonts).
285 The storage device type must be N (non-volatile RAM) or R (volatile RAM).
286 The buffer size is invalid.
287 The printhead width must be 0.
290 Action must be 0 (disable) or 1 (enable) for Backfeed Control.
291 Dispense position must be 50 to 200 dots and / or the backfeed distance is greater
than the dispense position.
292 Backfeed distance must be 10 to 200 dots.
293 The skip index selection defined in the field must be 0 (disabled) or 1 (enabled).
310
Check digit scheme number must be 1 to 10.