Avery Dennison SNAP 611 - Manual (Page 36)

28 • 3. Setting Supply Options Users Manual – 610 / 611/ 612 Printers
Batch Separators
The 610 / 611 / 612 printers do not support Batch Separators. Paxar strongly recommends
leaving the Batch Separator selection to “NO”.
Skip Index
You can use the skip index mode to skip (or ignore) a sense mark and print an image over
multiple labels, if necessary. For example, if you have 4.0" long supplies loaded, but your
image is 8.0" long, enable skip index mode to print the 8.0" long image on two labels. The
image length is determined by the format header. See your System Administrator or the
optional Packet Reference Manual for more information. The skip index feature is useful
when you have a single format that contains two labels, such as a shelf label and a carton
label.
When designing the format, make sure text or graphics do not print in the
gap of label rolls.
To change the setting, from the Main menu, select Setup, then Supply.
1. Press Í or Î until you see
SUPPLY
Å
Skip Index
2. Press Enter/Pause to set the skip index mode. You will see the current setting, for
example:
SKIP INDEX
No Æ
3. Press Í or Î to see the other options. After you display the option you want, press
Enter / Pause. Press Escape / Clear until you see the Main Menu.
Verifier
The 610 / 611 / 612 printers do not support the use of a verifier. Leave the verifier setting at
“Disabled”.