Avery Dennison SNAP 611 - Manual (Page 79)

Users Manual – 610 / 611/ 612 Printers 9. Troubleshooting • 71
311 Modulus must be 2 to 11.
314 Check digit algorithm must be D (sum of digits) or P (sum of products).
325 Duplicating direction must be 0 or 1.
327 Amount of row adjustment must be 0 to 999.
328 Duplicate count must be 0 to 999.
340 Bitmap line encoding must be H (hex) or R (run length).
350 Font selector must be 1 to 9999.
351 Font data length must be 68 to 16384.
352 Insufficient font memory is available for the downloaded font.
380 Job request is outside the range 0 to 4.
400 Invalid character following {.
401 Internal software failure. Call Technical Support.
402 Field separator is not in the expected location.
403 Field separator was not found.
404 The number of string that is currently being processed is too long.
405 Too many fields exist in the format. You cannot have more than 1000 fields in the
format. Lines, boxes, and constant text fields count as fields.
409 Printer memory is full. Delete unnecessary formats or graphics from memory. Try run
length encoding for large graphics.
Communication Failures
Errors 409 to 413 usually indicate a communication failure. These errors happen when the
host and the printer cannot communicate. Ask your System Administrator for help.
Error Description / Action
410 Parity
mismatch.
411 Framing error (baud rate mismatch). This error may appear when you turn off the
printer.
412 Flow control mismatch.
413 Online receive buffer is full. Check flow control settings.
414 The internal keyboard buffer is full or you need a new keypad.
415 The buffer size you defined exceeds the total available in your machine.
416 Flash/PC board error. Call Technical Support.
417 Flash memory is full. Clear flash. If the error reappears, call Technical Support.
420 Internal software list error. Call Technical Support.