Avery Dennison SNAP 611 - Manual (Page 47)

Users Manual – 610 / 611/ 612 Printers 5. Setting Defaults • 39
Prompt Set
Prompt set determines which language displays on the printer's menu. You can select
English, French, German, Spanish-ES, Japanese, Portuguese, Italian, Swedish, Spanish 2-
MX, Danish, Dutch, Finnish, and Norwegian. Some prompts may remain in English, even if
you select a different language.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
1. Press Í or Î until you see
DEFAULTS
Å
Prompt Set
2. Press Enter / Pause. You will see the current setting, for example:
PROMPT SET
English Æ
3. Press Í or Î until you see the option you want. Then press Enter / Pause.
4. Press Escape / Clear twice to exit to the Main Menu.
This option only affects the displayed prompts. It does not change what
is printed by the printer.
Flash Storage
Flash storage allows packets (with "R" or "N" selectors) to be stored in flash memory, instead
of volatile RAM. Packets stored in flash memory are saved when the printer is turned off.
However, flash memory storage is limited.
You must format flash memory before enabling this option. Formatting
flash memory is only required once during initial printer setup.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
1. Press Í or Î until you see
DEFAULTS
Å
Flash Storage
2. Press Enter/Pause. The current setting is displayed, for example:
FLASH STORAGE
Disabled Æ
3. Press Í or Î until you see the option you want. Then press Enter/Pause.
4. Press Escape/Clear until you see the Main Menu.