Avery Dennison SNAP 611 - Manual (Page 31)

Users Manual – 610 / 611/ 612 Printers 3. Setting Supply Options • 23
2. Press Enter / Pause to set the speed option. You will see the current setting, for
example:
SPEED
Å
Default
3. Press Í or Î to see the other options. After you display the option you want, press
Enter / Pause. Press Escape / Clear twice to exit to the Main Menu.
Feed Mode
You can use continuous or on-demand printing. On-demand printing allows you to remove a
label before printing the next one.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press Í or Î until you see
SUPPLY
Å
Feed Mode Æ
2. Press Enter / Pause to set the feed mode. You will see the current setting, for example:
FEED MODE
Continuous Æ
3. Press Í or Î to see the other option. After you display the option you want, press
Enter / Pause. Press Escape / Clear twice to exit to the Main Menu.
Backfeed
Backfeed works by advancing each printed label to the desired dispense position. Once that
label is removed, the next label to be printed is backed up underneath the printhead. In
continuous mode, only the last label in the batch is advanced to the dispense position.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press Í or Î until you see
SUPPLY
Å
Backfeed Æ
2. Press Enter / Pause to set the backfeed option. You will see the current setting, for
example:
BACKFEED
Å
On Æ
3. Press Í or Î to see the other options. After you display the option you want, press
Enter / Pause. Press Escape / Clear twice to exit to the Main Menu.