Avery Dennison SNAP 611 - Manual (Page 13)

Users Manual - 610 / 611 / 612 Printers 1. Getting Started • 5
Button Functions
Feed / Cut:
♦ Feeds a blank label if there is no print job.
♦ Prints a label with error information that is useful to your System
Administrator if an error is displayed.
♦ Cuts the supply when pressed and held for two seconds if a knife
is installed.
♦ When the printer is online, cuts the supply when pressed and held
for two seconds if a knife is installed.
♦ When the printer is offline, changes the displayed value by one
or 10.
Enter / Pause: When the printer is online, pauses the current print job or resumes a
paused print job. When the printer is offline, selects the displayed
menu item.
Escape / Clear:
♦ When an error is present, clears the error.
♦ When a job (batch) is printing, cancels the print job (batch). For
more information about canceling batches, see “Canceling a
Paused Batch”.
♦ When the printer is online (without errors), enters the offline menu
mode.
♦ When the printer is in the offline menu mode, returns the display to
the next higher menu.
Í When the printer is in the offline menu mode, displays the previous
menu item.
Î When the printer is in the offline menu mode, displays the next menu
item.
Í and Î In online mode, prints a test label when you press the buttons at the
same time. Hold for one second and release.
Display
The display shows a three-digit error code and brief message to identify any problem the
printer may have. For a description of the problem, look up the error code in Chapter 9,
“Troubleshooting”.
If there is no error, the display is blank.