Avery Dennison SNAP 611 - Manual (Page 46)

38 • 5. Setting Defaults Users Manual – 610 / 611/ 612 Printers
Slashed Zero
The slashed zero feature lets you select how you want the zero character printed; either
without a slash, 0 or, with a slash, Ø
Standard or reduced fonts print the slashed zero character (Ø). Bold and OCR fonts print the
standard zero (0) only. The slashed zero selection will not be in effect until the format is sent
to the printer again. If you change the way zero is printed, you must resend your formats.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
1. Press Í or Î until you see
DEFAULTS
Å
Slashed Zero Æ
2. Press Enter / Pause. You will see the current setting, for example:
SLASHED ZERO
No Æ
3. Press Í or Î until you see the option you want. Then press Enter / Pause. Press
Escape / Clear twice to exit to the Main Menu.
Power-Up Mode
Power-up mode lets you decide how your printer starts each time you turn it on. If you want
the printer to be ready to start printing when it is turned on, use the Online power-up mode. If
you want the operator to perform some other task first, use the Offline power-up mode.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
1. Press Í or Î until you see
DEFAULTS
Å
Powerup Mode Æ
2. Press Enter / Pause. You will see the current setting, for example:
MONETARY SIGN
Å USA Æ
3. Press Í or Î until you see the option you want. Then, press Enter / Pause.
4. Press Escape / Clear twice to exit to the Main Menu.