Avery Dennison SNAP 611 - Manual (Page 15)

Users Manual - 610 / 611 / 612 Printers 2. Loading Supplies • 7
2. Loading Supplies
This chapter describes how to load a roll of supply and a ribbon roll.
You can use Paxar's fabric label kits containing fabric labels and ribbon. If you switch from
black mark to continuous supplies make sure the printer is set for the correct supply type.
Make sure you use only approved Paxar supplies. See Appendix A, "Specifications and
Accessories" for a list of Paxar supplies or contact your Paxar Representative for more
information.
If you experience label jamming with narrow supplies in humid environments, store supplies
separately from the printer in a dry, less humid environment.
CAUTION
The width of the ribbon must be greater than the supply width. Since
some supplies are more abrasive to printheads than others, using a
ribbon wider than your supply helps protect the printhead. Failure to do
this may void your printhead warranty. Replacement printheads are
expensive.