Avery Dennison SNAP 611 - Manual (Page 51)

Users Manual – 610 / 611/ 612 Printers 6. Printing • 43
6. Printing
This chapter explains how to
♦ Use on-demand mode printing.
♦ Print an error label.
♦ Print, pause, restart, cancel, and repeat a batch.
You can send format, batch, and graphic data to the printer from a host. When the printer
receives the data, batches begin printing automatically. The optional Packet Reference
Manual tells how to create, store, and download the data necessary to print batches. You can
also use the Monarch® MPCL™ Toolbox utilities to create and download packets.
Printing
Before you print, make sure the printer is connected and ready to receive data.
1. Turn on the printer. Your printer is ready to receive and print batches when you see
PRINT MODE
Ready
2. Download a format and a batch. Refer to the optional Packet Reference Manual for
information on downloading print jobs.
3. The printer prints a strip of labels.
4. Remove the printed labels.
If the printer will be unused for extended periods of time, we recommend
leaving the printhead unlatched.
An optional keypad is also available to enter offline batch data. The keypad must be
purchased separately. If there are offline batches in the print queue, the offline batches print
after the downloaded batches have printed.
NOTE: Due to the way labels are printed by the 612 printer, the total label count will not be
exactly the same as the batch size.
Printing an Error Label
If the printer displays a data error (errors 0-499),
press Feed to print an error label and continue
printing. See your System Administrator about
the error label.
Do not print an error label on a 612 printer.