Artesyn iVPX7225 Installation and Use (April 2015) - Manual (Page 41)

Hardware Preparation and Installation
iVPX7225 Installation and Use (6806800S11C) 22
Product Damage
 High humidity and condensation on the board surface causes short circuits.
 Do not operate the board outside the specified environmental limits. Make sure the
board is completely dry and there is no moisture on any surface before applying power.
Table 2-1 Environmental Requirements
Environmental Parameter Air Cooled Conduction Cooled
Cooling Method Forced Air Conduction
Operating Temperature -40 °C to +71 °C
1
-40 °C to +71 °C
2
(card edge)
Storage Temperature -50 °C to +100 °C -50 °C to +100 °C
Vibration Sine (10 min/Axis) 5G, 15 to 2000 HZ 10G, 15 to 2000 HZ
Vibration Random (1 Hr/Axis) 0.04g2/Hz, 15 to 2000 Hz
(8GRMS)
3
0.1g2/Hz, 15 to 2000 Hz
(12GRMS)
4
Shock 30g/11ms 40g/11ms
Humidity to 95% RH non-condensing to 95% RH non-condensing
1. Ambient temperature at sea-level without PMC/XMCs installed, while maintaining >= 80% CPU
performance (<=20% frequency down-step or duty-cycle throttling).
2. Measured at card edge, without PMC/XMCs installed, while maintaining >=80% CPU performance
(<=20% frequency down-step or duty-cycle throttling).
3. Flat 15-1000Hz, -6db/octave 1000Hz – 2000Hz [MIL-STD 810F Figure 514.5C-17]
4. +3db/octave 15-300Hz, Flat .1g2 300-1000Hz, -6db/octave 1000Hz – 2000Hz [MIL-STD 810F
Figure 514.5C-8]