Artesyn iVPX7225 Installation and Use (April 2015) - Manual (Page 32)

Introduction
iVPX7225 Installation and Use (6806800S11C) 13
Memory  Soldered down 8GB dual-channel DDR3L-1600 memory
(4GB/Channel) with ECC
User Flash/ NVRAM Mem-
ory  4GB embedded USB flash
 1 MB FRAM (NVRAM)
Boot Flash Memory  Redundant UEFI BIOS in dual 8MB SPI flash devices
Backplane I/O  Two 1000BASE-BX/KX Ethernet (Ultra Thin Pipe control plane)
 Two PCIe x4 Gen2 (Fat Pipe data plane)
–
Either PCIe port may be configured to support Non-
Transparent bridging (one NT port max)
 One DisplayPort
 One VGA
 Three USB 2.0
 Three SATA (2x Gen3, 1x Gen2)
 Two RS-232/RS-422/RS-485
 Eight PCH GPIO
 VITA 46.9 XMC IO Pattern X12d support
 SMBus
 IPMC I2C
 Selective Non-Volatile Memory R/W Overrides
 RTM control signals
Front Panel I/O  Air cooled
–
XMC Front I/O
– Reset switch
– Status LEDs
 Conduction cooled
–
Reset switch
– Status LEDs
Ethernet Controllers Intel 82580 Ethernet Controller (Ethernet control plane)
Optional Transition Mod-
ules
Mini DisplayPort, VGA, USB 2.0, Ethernet, Serial, I2C,
GPIO, SATA, XMC IO, write protect override switches
Table 1-1 Key Features of the iVPX7225
Features Description