Artesyn iVPX7225 Installation and Use (April 2015) - Manual (Page 40)

Hardware Preparation and Installation
iVPX7225 Installation and Use (6806800S11C) 21
2. Check for any damage. If there is some damage, report immediately to customer
service.
3. Remove the desiccant bag shipped together with the board and dispose properly.
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the board.
2.3.1 Environmental Requirements
The environmental conditions must be tested and proven in the used system configuration.
These conditions refer to the surroundings of the board within the user environment.
The board is thoroughly inspected before shipment. If any damage occurred during trans-
portation or any items are missing, please contact customer service immediately.
 Operating temperatures refer to the temperature of the air circulating around the board
(air-cooled) or the temperature of the card-edge (conduction-cooled), and not to the
component temperature.
 To ensure that the operating conditions are met, adequate cooling is required within the
shelf environment.
 The environmental values given in the table below only apply to the board without any
accessories. If installing accessories, their environmental requirements must also be
taken into account.