DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 85

Running Time

This shows the time of the displays running history.

Power On Safe Time

The default amount of time is 360 seconds. The user cannot restart

power within the set safe time after the display is off. This restriction is

made to help protect the DynaScan display. To have a valid time, enter

the appropriate time in seconds and press “Enter”.

* This parameter can be adjusted by the user. DynaScan Company

is not responsible for any damaged caused to the Display by over-

short safe time set by the user.

Excool Enable

This is a function to cool the display after it has been turned off. Some

models do not support the function and are grayed out.

[*Note]: Support for models: DS0706, DS0716, DS1016, DS1713-3,

DS2012-3 and DS3522.

Information

S/N: Display serial number

DVI Version: F/W version of DVI board。

MCB A Version: not available

MCB B Version: not available

Display Mode

Not available

This manual is related to the following products: