DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 130)

Copyright © 2008 DynaScan Technology Corp. 130
Upload: It sets the maximum bandwidth when uploading. The unit is
KBits.
5. Content Path
Path: It sets the access path of broadcasting content, which can input a
path into the field or click to show the window of path. Click
the OK key to complete the path setting.
Device: It selects the device for saving content. The drop-down list is
for selecting the device to place the file. The devices
supported memory cards include CF/MicroDrive, SD/MMC,
MS/MSPRO and SmartMedia. The program will auto detect if
there is a supported USB drive plugged in. This option can be
set when the hardware is in use, the gray scale can’t be set
when the hardware is not in use.
*Note: Only one Path and Device can be used.
6.
Auto Startup: It selects whether to enable the startup function of File
Transmit Client auto run. The default is enabled.
Soft-Watchdog Enable: It selects whether to enable the function of
software Watchdog. The function of Watchdog will restart the
computer for troubleshooting after starting File Transmit Client
stops responding. The default is enabled.
Firewall Server Port: It sets the Firewall Server ports used to perform
the operation for firewall via Firewall Server. If there is no setting
for the port, it will cause the firewall to block the outside connecting
of File Transmit Client. The default value is 2267.
FDT Port: It sets the port of single point transmit. The default value is
8768.
7.
Save and Restart: It saves the current setting state and restarts File
Transmit Client.
Cancel: Cancels any unsaved settings
8. Server Setting
IP: It sets IP address of the server.
Port: It sets Port of the server.