DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 145

6.6 ECU

Open Operation Interface

The

icon at the lower right corner on the OS desktop indicates that ECU

is running.

Move the mouse to the icon and click the right mouse button to prompt the

menu shown below.

Setting: It opens the ECU operation interface.

Disable Watchdog: It disables or enables the Watchdog function. When the

AP3 program stops responding, Watchdog will reboot the system after

waiting for 5 minutes. If it is necessary to shut off AP3, remember to

select “Disable Watchdog” to avoid rebooting. “Disable Watchdog” is a

one time only setting.

Watchdog Dialog

When the AP3 program does not respond, Watchdog will wait for 5

minutes then exit the window and wait another 30 seconds for users to

decide to “Stop” or “Always Stop” as described below. The system will

reboot if nothing is selected.

Stop: If Stop is clicked, Watchdog will wait for 5 minutes and ask again.

Always Stop: If Always Stop is clicked, the Watchdog function is

disabled and the program will select “Disable Watchdog”

automatically.

Exit: It quits the ECU program.

This manual is related to the following products: