DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 79

Force Power On

After the display is manually powered off, a cool down countdown display

and button will appear in the interface. The user can click “Force Power On”

to start the display before the countdown has completed, but it is not

recommended.

[*Note]: Forcing Power On when the screen has not come to a complete

stop can damage the display. The cool down time will vary depending on

which model is in use.

[*Note]: This action will cause the Monitor System Schedule to stay paused,

until it is released or AP3 is restarted.

Monitor System Schedule Suspend

Some operations will conflict with the schedule settings. When a conflict

happens, a warning message will be shown.

When this happens, click the “Resume” button in the Schedule options to

restart the schedule. The schedule will not continue until the “Resume”

button is pressed, AP3 is restarted, or the computer is restarted.

Outside

Power

Off

Enable

Once this function is enabled, the display can be shut down by hardware of

software. This setting is disabled by default.

This manual is related to the following products: