DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 122)

Copyright © 2008 DynaScan Technology Corp. 122
Login Server IP: It sets the IP address used by the DynaNet login server.
Login Server Port: It sets the port used by the DynaNet login server. The
default is 2268.
Machine Name: It sets the machine name on the DynaNet server.
Ethernet Adapter: It sets up the MAC Address of the network card.
※ NOTE: The Dynamic IP function only applicable for DynaNet environment.
AP3 Auto Starup Run
It sets up AP3 to run automatically when the PC starts. The default is Auto
Run (enabled).
Use XP Firewall
It sets up the firewall built-in by Windows XP. The program will create the
settings to work with the ports within XP firewall automatically when enabled.
The default is enabled.
Soft Watchdog
It sets up the Watchdog software function. When AP3 has no response or
the system is down, Watchdog will reboot the PC and try to resolve the
failure. The default is enabled.
Restore Default Setting
It restores the settings to the program default.
Load Current Setting
It loads the settings saved in the current program.
Save and Exit
It saves the settings and exits AP3 Config.