DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 149)

Copyright © 2008 DynaScan Technology Corp. 149
message, and press the Enter key to complete the operation.
Text color: A selected color is represented by the color pieces in the
Color Column. Double left click for Color List, select the color and
press Enter to complete the modification.
Prepositive Image
The image column will show the filename of the prepositive image set
to the current message. When the marquee displays the message, an
appointed image is shown in front of the text and is automatically
zoomed in/out with geometric proportion to fit the marquee display
window. The function only supports the .BMP files currently. Double
left click the picture for the Image Selection Dialog Box, and select the
desired file to change the image. The set image should not to be
oversize compared to the marquee display window.
Instantly modify marquee content remotely
There are two ways to modify the marquee content remotely. They
are through an internet connection and RS-232 Serial connection.
The marquee message can be modified during operation. The
updated message file will immediately apply the addition of a new
message to the marquee, but not immediately cause change in
display. Change shows in the display when the new message is
reeled in, and the old message will not show anymore after reeled out.
Therefore, distant modification of the marquee content can be
completed through replacing old file with a new one via the file
transmission functions (shared directory, FTP, etc.)