DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 69)

Copyright © 2008 DynaScan Technology Corp. 69
Accelerator
In first installation of AP3 accelerator, the default is set as VMR7. Accelerator
should be selected to match hardware efficiency. The function requires
restarting AP3 to validate setting after setup. Please see pg. 30 for more
information on accelerator settings.
Screen Type
Screen types include single-view, dual-view and multi-view, dependant on
the display mode of graphic card. Generally, the graphic card is set as clone
mode, representing single-view display with the same output on two screens.
When dual-view is adopted, one screen is enabled as control panel to
display operations, and the rest work as independent screens. In this
configuration, AP3 operation will not affect display of other played content.
This function takes effect immediately.
At maximum, there may be one control screen plus three independent
screens for playing content with Screen Type set as Multi-Screen. Sub-
options Screen 1, Screen 2 and Screen 3 appear under items of Startup Run
and Display Position in left setup subject section. Each represent an
independent screen for play content respectively. The user should click
screens represented by sub-options for corresponding setup.
With multi-screen selected, the right combo box illustrated below becomes
multi-screen with 3 options of MS1:Default, MS2:Default and MS3:Default.
MS1 represents play content of Screen1, MS2 represents Screen2, etc.