DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 150

Modify marquee content via RS-232 (COM Port)

The user can set up a group of marquees in the playing terminal Plug-

in, setup the RS-232 communication port like COM 1 or COM 2 (the

COM Port receiving the data) of the Remote Comm in “Marquee

Parameter Setter” serving the group of marquees.

Start up Message Editor v3.0, set the RS-232 communication port

(the COM Port transmitting data), and connect the two ends of a RS-

232 “Jumper” with the COM Port. When the signal has successfully

connected at both ends, a light in the left lower corner of Message

Editor v3.0 will turn green from red.

Editing terminal can adopt three functions to adjust the marquee,

including Visible, Speed, and Space. Click “Update Message” to send

out the message after editing has completed.

This manual is related to the following products: