DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 140)

Copyright © 2008 DynaScan Technology Corp. 140
IP Address: It sets the IP address of the machine being used.
MPT Port: It sets the Port of the machine being used in the multiple
point transmit protocol.
FDT Port: It sets the the Port of machine being used in the single
point transmit protocol.
MAC: It inputs the network card’s physical address of the machine.
* Note: This field is currently not in use.
Description: This will show the description of the machine.
Upload: This will enable/disable the upload feature. The default is
enabled.
Modify: Modifies the settings of the machine.
Remove: Removes the selected machine from the machine list.
Auto Check: Enables automatic checking of the connection status
between the Server and the media playing devices. The symbol (X)
means that this machine does not connect with Server, the reasons
may be the machine has shut down or is not connected to the network.
The symbol (O) means this machine is connected to the Server. The
symbol (?) means the Server is trying to connect with the machine but
is unable to. The symbol (N) means the machine is not set up on this
Server.
Remote Function: The following window will be displayed when the
Server is trying to establish a connection with the selected device.
The following window will be displayed when the connection between
the Server and the selected device has been established. The status
has two states: Normal and Server Failed.
Reset Server: It sets the connecting Server of the selected remote