7 options – DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 68

5.7 Options

Configure layout

Label 1 – Setup subject section provides setup list. Clicking a subject in Label 1 will

switch Label 2 to the parameter setup of the subject.

Label 2 – Detail Parameter Setup Section. Detail parameter setup of each subject

will be described in following paragraphs.

5.7.1 Startup Setting

Select Model

To select model of display equipment, listing all DynaScan display models

supported by AP3. The model setting will affect the size of the image in the

output window as well as the communication protocol of Monitor System.

Currently supported models consist of DS0616 series, DS0613 series,

DS0612, DS0716, DS0808, DS1016, DS1508, DS1713, DS1713-3,

DS2012, DS2012-3, DS3522 series, DS0706, etc. FULL SIZE will scale

content to the output resolution of the graphic card, for use with a projector,

traditional TV, plasma TV, LCD TV, etc. FULL SIZE should not be used with

DynaScan displays, as the image will be cropped.

This manual is related to the following products: