DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 112

5.7.12 Monitor Computer Resource

This function of the computer is resource management, to prevent computer

problems caused by an over-consumption of resources.

If it is not necessary, do not change any of the monitoring values.

Enable Resource Monitor

By default, this is disabled. The resource monitoring system will be loaded after

it is enabled.

Label 1： Current value of resources being used.

Label 2： Monitor setting can be modified by operators based on personal

needs.

Label 3： There are four different options for the computer to perform if too

many resources are being consumed.

Disable：No action will be taken.

Restart：Restart AP3.

Reboot：Restart the computer.

Shutdown：Shut down the computer.

AP3 will execute the appropriate action when the numerical value reaches the

current setting.

This manual is related to the following products: