DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 82)

Copyright © 2008 DynaScan Technology Corp. 82
If the drum temperature is above 50℃ but less than 60℃, Thermal Warning
will be activated. This will cause the display’s brightness to be reduced by
50% of the highest brightness. It will be deactivated after the temperature is
below 45℃. (Currently, only for model DS1016)
[*Note]: If the brightness is already less then 50% of the highest brightness,
no change will occur.
Air Conditioner State
This field show the current state of the Air Conditioning. Green is for no
detected problems, Red is for a dectected problem, and Grey is for no
detection at all.
MCB A Status
The function is disabled.
MCB B Status
The function is disabled.
DVI Status
The function is disabled.
Encoder Status
The function is disabled.
If detecting any incorrect information in monitoring panel, please contact
DynaScan agents or engineering department.