DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 124

Connect Setting

IP Address: It sets up the IP address. Please connect the internet cable

before executing AP3 Config so that the field will show the PC’s

correct IP address. If executing AP3 Config without connecting the

internet, it shows the default IP address 192.168.1.101.

File Trans Port: It sets up the port used for file transmission. The default is

8765.

Publish Port: It sets up the port used for file publish. The default is 8767.

FDT Port: It sets the up port for FDT service. The default is 8768.

Restore Default Setting

It restores the settings to the program default.

Load Current Setting

It loads the settings saved in the current program.

Save and Exit

It saves the settings and exits AP3 Config.

This manual is related to the following products: