DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 70

Auto Startup

Select this setting to automatically run AP3 when starting computer. By

default, this setting is disabled ( ).

VMR9_RL Frame Reversal

If display equipment is installed upside down, the user can enable the setting

to properly display content. Only VMR9_RL, CLONE and CLONE3

accelerators support this mode and should be setup as the accelerator while

enabling the function. By default, this setting is disabled ( ).

Power Point Offset Enable

If the screen displays a scroll bar, you can enable this setting to move the

scroll bar out of the screen. It is not necessary to enable this setting if no

scroll bar is displayed. By default, this setting is disabled ( ).

Billing Record Enable

If the user requires actual play progress of content or billing record as receipt,

the function should be enabled to record play progress after starting AP3.

The default is set as (disable). 。 * The function takes effect after

restarting AP3.

* What is billing record and how to use it?

Billing record is saved to the folder set by Billing Path. It will generate

two files with filename extension as .rec and .cnt. Billing Report is a

accessorial program and is required to transform original file to an

Excel document. Please refer to introduction of accessorial program for

the usage of Billing Report (page 151).

Computer ID

The user may operate several display equipment simultaneously and need

to distinguish the billing record of each computer. This function is provided to

enhance identification of each individual record, as the user can input a

unique identification number for each computer.

* The function takes effect after restarting AP3 once setup.

This manual is related to the following products: