DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 120)

Copyright © 2008 DynaScan Technology Corp. 120
6.2 AP3 Config (Client)
Introduction
When the AP3 Client has finished installing, run AP3 Config to configure AP3
before executing the AP3 DSPlayer for the first time. Note, that everytime
AP3 Config executes the values and settings are shown in as the programs
defaults without loading the previous settings. Be sure that the internet is
connected before executing AP3 Config.
Network Speed
Download: It sets the maximum bandwidth on the network for downloading.
The unit is KBits and the default value is 102400KB (100MB).
Upload: It sets the maximum bandwidth on the network for uploading.
The unit is KBits and the default value is 102400KB (100MB.)
Content Path
Path: It sets the path for storing the playing content. First click Path and
enter the path (such as D:\Content) into the field, or click to prompt
the Content Path window (as the figure shown below) and specify the
path for storage. Ex. the figure below specifies the path to be the file