DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 129

Option Setting

Local IP: It sets the IP address of the machine used. The default value

is 127.0.0.1.

Local Port: It sets the port of the machine used. The default value is

8766.

Use Virtual Server: It selects whether to enable virtual server. The

default value is enabled.

Virtual Server IP: It sets the IP used in the virtual server. This IP is the

value that AP3 Config sets for the Client IP.

Virtual Server Port: It sets the port of the virtual server used.

Use Dynamic IP: It chooses whether to use dynamic IP. Enable this

function after confirming it has a dynamic IP. The

default is disabled.

Machine Name: The machine sets the name of the DynaNet server.

Ethernet Adapter: It selects the MAC Address of the network card.

※

Note: The function of Dynamic IP is only suitable for the DynaNet

environment.

4. Network Speed

Download: It sets the maximum bandwidth when downloading. The

unit is KBits.

This manual is related to the following products: