DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 77)

Copyright © 2008 DynaScan Technology Corp. 77
5.7.4 Monitor System
AP3’s Built-in Monitor System works exclusively with DynaScan displays. All
functions will take effect when making adjustment.
5.7.4.1 Operator
Serial Port
The computer controls the display equipment via COM Port. The Serial Port
should be set as the corresponding RS-232 port connecting the computer to
the DynaScan display.
* How to disable built-in monitoring system of AP3
Select “Disable” in Serial Port setup.
Select Model
The default is set as Auto. If DynaScan display model has been set in
Startup Setting, AP3 will adopt corresponding protocol version. Three
protocol versions may be manually set: Version 2.0, Version 3.01 and
Version 2003. Please confirm the version can properly function to monitor
the DynaScan display before manually setting to prevent selected version
from causing a display failure or improper monitoring state.
AP3 will use the appropriate monitor application when the model has been
set in ‘Startup Setting’. The selected model will be reflected in the “Select