DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 81)

Copyright © 2008 DynaScan Technology Corp. 81
Thermal
Alarm
(>60℃)
-- --
Abnormal
Status
In
Order
Not
detecting
Abnormal
before
--
AC/DC1
Alarm
-- --
Abnormal
Status
In
Order
Not
detecting
Abnormal
before
--
AC/DC2
Alarm
-- --
Abnormal
Status
In
Order
Not
detecting
Abnormal
before
--
AC/DC3
Alarm
-- --
Abnormal
Status
In
Order
Not
detecting
Abnormal
before
--
Preheat -- -- -- -- -- -- Preheat
Precool -- -- -- -- -- -- Precool
Excool -- -- -- -- -- -- Excool
Thermal
Warning
-- -- -- -- -- -- Warning
Preheat / Precool / Excool
This shows the status for “Preheat”, “Precool”, and “Excool”
Preheat: If the temperature of the drum is below 5℃ when the display is started,
Preheat mode will be activated (showing (yellow)), the screen will not spin.
The Preheat state will be deactived when the drum’s temperature is greater
than 5℃ (or about 8 minutes). (Certain models only)
Precool: If the temperature of the drum is above 35℃ when the dispay is started,
Precool mode will be activated (showing (blue)), the screen will spin and
LED’s will be turned off. The Precool state will be deactived when the drum’s
temperature is below 35℃ (or about 5 minutes). (Certain models only)
Excool: When the display is shutting down, Excool mode will be activated
(showing (blue)), the display will be spinning and black for about 6
minutes. It will power off the display automatically and the content will stop.
(Certain models only)
Thermal Warning