DynaScan Indoor 360 Degree LED Video Display DS0808 User Manual

Page 107

Client Port: It sets the port used by Client for file transfers. The default is

8766.

Server IP: It sets the IP address used by the Server for file transfers. The is

default is 127.0.0.1.

Server Port: It sets the port used by the Server for file transfers. The default

is 8767.

FDT Port: It sets the port to be used by the FTP. The default is 8768.

Register Name

The DSPlayer registers the path name to FDT for data storage. When the

remote user and client are doing a FDT transfer, the client FDT will provide a

shortcut to the remote user to save time on file searches.

Billing: It is the file storage path for billing that set up during registration.

The default is billing.

Message Log: It is file storage path for Message.log that set up during

registration. The default is MessageLog。

Event Log: It is the file storage path for AP3Event.log that is set up during

registration. The default is EventLog。

Common Path: It is the storage path for common data that is set up during

registration. The default is CommonPath. It is in a hidden state.

Content Path: It is the storage path for Content that is set up during

registration. The default is ContentPath.

Firewall Set

It connects to the open port of ECU and manages the firewall through ECU.

ECU Port: It sets the port used by ECU. The default is 2267.

Dynamic IP

This setting is required when the client IP address is dynamic. The input IP,

Port and Name have to be the same as the settings on DynaNet server for

proper login.

Is Dynamic IP: It enables/disables being able to use dynamic IP. Ensure it

is a dynamic IP before enabling it. The default setting is disabled.

Login Server IP: It sets the IP address used by the DynaNet login server.

Login Server Port: It sets the port used by the DynaNet login server. The

default is 2268.

Machine Name: It sets the machine name on the DynaNet server.

Ethernet Adapter: It sets the MAC Address of the network card used.

※

NOTE:

The Dynamic IP function is only applicable for the DynaNet

environment.

This manual is related to the following products: