DynaScan Indoor 360 Degree LED Video Display DS0808 - Manual (Page 109)

Copyright © 2008 DynaScan Technology Corp. 109
5.7.10.2 SMTP Setting
If the SMTP (Simple Mail Transfer Protocol) settings are enabled, the program
will send an e-mail to the specified mailbox to notify the user when the device is
encountering errors or the problem is resolved.
Use auto alarm e-mail
It enables/disables the auto alarm E-mail feunction. By default, this is
disabled.
SMTP Setting
These are the SMTP (Simple Mail Transfer Protocol) settings.
Mail Server: It sets the host name or IP address used by the mail server.
Server Port: It sets the port used by the mail server.
Use authentication to log in to this server: It sets the User name and
Password to login to the mail server.
User name: It sets the user name for logging into the mail server.
Password: It sets the password for logging into the mail server.
Use SSL: It sets up the SSL (Secure Socket Layer) function.
SSL Method: It sets up the SSL method.
From email address: It sets the e-mail address of the sender.